Uranium Mineralisation Intersected - Nabarlek North Project
Released
Released
Announcement PDF
ASX Announcement
19 December 2023
Uranium mineralisation intersected at Alligator’s
Nabarlek North Project in maiden RC drilling program
Nabarlek North Project, Alligator Rivers
Alligator Energy (ASX: AGE, ‘Alligator’ or ‘the Company’) is pleased to announce the results of
its maiden RC drilling at the 100% owned Nabarlek North Project (EL31480) in the Alligator Rivers
Uranium Province (“ARUP”)
Highlights
• Assays received for AGE’s maiden 1,398 m reverse circulation (RC) drilling, Nabarlek North
Project.
- NNRC23-008 drilled 200 metres along strike from the neighbouring high-grade U40
Prospect1 intersected 3 metres at an average grade of 0.12% (1,211ppm) U3O8.
▪
Peak interval of 1m at 0.23% U3O8 (2,263ppm).
• U40 Prospect uranium mineralising system now proven to continue into the Company’s
Nabarlek North Project for potential future targeting and follow-up.
• 2023 ARUP field season completed with geophysics, aircore drilling and field mapping
programs in addition to RC drilling, including:
o
o
o
o
15km2 gradient-array induced polarisation (IP) geophysics.
2 Pole-Dipole IP lines at 25m dipoles for 3.4km (1.7km each).
Over 320 Aircore holes averaging 20m for 6,233m total.
100 shallow Auger holes drilled to 1.5m.
Pending delivery of final data (including assays for all 2023 drilling), results will be integrated with
historic and AGE’s data compiled to date to progress the Nabarlek North Project exploration
strategy for 2024.
Greg Hall, Alligator CEO, said: “It is pleasing to see the solid momentum and tangible outcomes
as we begin to analyse the results of our first full year in the field at Nabarlek North.
Along with the first significant intercept in our project area, the 2022 - 2023 field programs are
confirming the proof-of-concept mineralisation model developed by Alligator. This includes
confirming rock types that we can confidently assign to the Cahill Formation, the most uranium fertile
formation present in the ARUP, and first-hand knowledge of the controls and alteration signature
required for mineralisation. It all lends credence to our exploration strategy and highlights the
potential for more exciting results going into 2024.”
DevEx Resources Ltd ASX Release 6 December 2023, “Deep, High-Grade Uranium Intersected at U40” 61185041.pdf
(devexresources.com.au)
1
ABN 79 140 575 604 | Suite 2, 128 Bowen St, Spring Hill, QLD 4000 | +61 (0) 7 3839 3904
info@alligatorenergy.com.au | www.alligatorenergy.com.au | Page 1 of 14
ASX: AGE
Key Results from the 2023 Nabarlek North RC Drilling Program
•
As part of the 2023 Nabarlek North exploration program, a nine-hole RC drilling program was
completed in October. A total of 1,398 m was drilled on three drill lines (3-holes per line) with
a typical hole depth of 150 m. All holes were sampled and assayed at ten-meter intervals from
surface to total depth in combination with selected intervals.
•
Drillhole NNRC23-008, on the southernmost drill line (Figure 1 & 2) intersected an average
grade of 0.12% U3O8 over 3 metres from 35 m, with a peak of 0.23% between 36 and 37 m
(Table 1). The intercept lies 200 m to the north of the known DevEx Resources’ U40 Prospect.
Table 1. Uranium intercepts from AGE Nabarlek North RC drilling program, October 2023. U3O8 concentrations as
determined from assays on 1 m bulk samples. Minimum threshold of 200 ppm U 3O8 used for reporting purposes.
Hole ID
Easting
Northing
RL(m)
Depth (m)
Dip
Azimuth
NNRC23-007
327257
8645303
63
150
-60
90
NNRC23-008
327156
8645306
64
198
-60
90
NNRC23-009
327033
8645302
65
150
-60
90
From (m)
Interval (m)
U3O8 (%)
No Significant Intercept
35
3
0.12
No Significant Intercept
Figure 1. Section view of the southern fence line. U40 Prospect extensions are less than 200 m to the south of the
section (fault zone projected into section). Note: drillholes in grey show historical drilling in or near the plane of the
section.
2
•
The two other drill lines were positioned to test (i), interpreted structure north of the U40
Prospect with potential Cahill Formation below dolerite cover; and (ii), a series of geophysical
features in a complex low-angled structural zone with some evidence of chlorite + hematite
alteration (from recent traverse air-core drilling). While neither drill line appeared to intersect
uranium mineralisation (assays still pending as of 19/12/23), they have provided invaluable
data to aid in the overall regional interpretation and targeting approach.
•
In addition to the significance of obtaining a uranium intercept along trend from known
mineralisation, the program has also demonstrated that:
o
o
•
The alteration halo around mineralisation is narrow, possibly measured in metres.
Several alteration styles are present throughout the tenure with potential to provide both
vectors to mineralisation and leading to false positives.
While legacy drilling in the vicinity of the uranium intercept places some directional bounds on
mineralisation, additional modelling and data integration will be conducted to test for further
upside potential – including at depth, following recent deeper intercepts at U40(1).
Figure 2. Plan view of AGE’s RC drilling program, Nabarlek North Project. Nine holes drilled over three fences
for a total of 1,398 m were completed in October 2023.
3
Other 2024 Field Results and Exploration Implications
•
In addition to the RC drilling program outlined above, AGE completed the following additional
work program at Nabarlek North Project this field season:
o
o
o
o
o
Gradient induced polarisation geophysics (IP) covering 15km2,
Pole-dipole IP across 2 lines in follow-up features identified in the gradient IP outlined
above,
Over 320 aircore/RAB holes with an average depth of 20m to test pre-Cretaceous
geology,
Over 100 auger holes where transported and Cretaceous cover were projected to be
shallower and near-outcropping, and
Field mapping in shallower cover areas.
•
Designed to provide project-wide prospectivity mapping and geochemical target generation,
the 2023 field program aims to confirm suitable wide-spread stratigraphy (Lower Cahill
Formation), trap and reductive environments to host prospective uranium mineralisation.
•
Our integrated, multi-technique approach to exploration will continue through 2024 testing
targets generated from the 2023 program and expanding target generation over untested
portions of the tenure with an increased focus on sections of Lower Cahill Formation
interpreted from the magnetics and surface mapping where possible.
•
In line with results so far, specific follow-up target testing will require several lines of drill holes
even on first pass to target narrow structurally controlled mineralisation below cover. As such,
a more comprehensive RC drilling program is being incorporated into 2024 planning.
In addition to on-ground works, a work program meeting with Traditional Owners was
undertaken across 2 days in October covering a range of exploration activities proposed for
2024 securing early approvals for anticipated works next year.
•
It is anticipated that all remaining assays and outstanding final data (including final IP products) will
be received by end January 2024 such that priorities for next year’s Nabarlek North exploration will
be finalised by the end of the first quarter of 2024.
4
Background
(modified from AGE 29 May 2023 announcement, see - https://wcsecure.weblink.com.au/pdf/AGE/02670412.pdf)
The Nabarlek North Project represents a highly prospective under-explored region within the ARUP
(Fig 3), typified by the presence of an exhumed Proterozoic unconformity and enough cover
sediments to mask bedrock radiometric signatures and discouraged past exploration. Alligator
started 2022 not knowing if there were fertile geological formations present in the project area.
Historical data has largely been ambivalent with regards to bedrock geology, and it has been widely
assumed that the Project is underpinned by the barren Nimbuwah Complex granites and gneisses,
rather than the fertile Cahill Formation that host most of the economic orebodies in the ARUP.
However, the Project is located less than 7km north of the historic Nabarlek uranium mine which
produced 24Mlb of U3O8 at an average grade of 1.84%(1). The U40 Prospect, located 200m south of
Alligator’s southern tenement boundary, has historically reported grades of up to 6 m @ 7.6% U3O8(1)
demonstrating high-grade occurrences proximal to the Nabarlek North Project.
Figure 3: Location of the Nabarlek North work area and Alligators ARUP Project tenure in the NT
5
The work carried out in 2022 through to 2023 was the Company’s first foray into this Project and was
designed to establish in an inexpensive manner testing for fertile geological formations and
structures under the thin cover.
The findings from 2022 show that previous interpretations are incorrect and that the fertile Cahill
Formation is likely to be widely present but segmented by regional scale structures capable of
‘plumbing’ a uranium mineralising system.
Alligator believes that armed with the right datasets and a predictive geological model, we will be
able to take advantage of simple and inexpensive exploration techniques to make a discovery
through thin cover. While sandstone cover and the associated unconformity have previously been
seen as essential ingredients to the mineralisation model in Arnhem Land, the identification of
mineral resources and occurrences at depth below the unconformity such as Ranger 3-Deeps,
demonstrate it is not essential. Alligator will not only be exploring the possibility of extensions of the
U40 Prospect mineralised system into the Nabarlek North tenement package, but also be pursuing
identification of new uranium systems further north where Cahill Formation is now interpreted
beneath unexplored cover.
This announcement has been authorised for release by the Alligator Energy CEO.
Contacts
For more information, please contact:
Mr Greg Hall
Mr Mike Meintjes
CEO & Director
CFO & Company Secretary
gh@alligatorenergy.com.au
mm@alligatorenergy.com.au
For media enquiries, please contact:
Alex Cowie
Media & Investor Relations
alex@nwrcommunications.com.au
This announcement contains projections and forward-looking information that involve various risks and uncertainties
regarding future events. Such forward-looking information can include without limitation statements based on current
expectations involving a number of risks and uncertainties and are not guarantees of future performance of the Company.
These risks and uncertainties could cause actual results and the Company’s plans and objectives to differ materially from
those expressed in the forward-looking information. Actual results and future events could differ materially from anticipated
6
in such information. These and all subsequent written and oral forward-looking information are based on estimates and
opinions of management on the dates they are made and expressly qualified in their entirety by this notice. The Company
assumes no obligation to update forward-looking information should circumstances or management’s estimates or opinions
change.
Competent Person’s Statement
Information in this report is based on current and historic Exploration and Resource Drilling Results compiled
by Dr Andrea Marsland-Smith who is a Member of the AusIMM. Dr Marsland-Smith is employed on a full-time
basis with Alligator Energy as Chief Operating Officer, and has sufficient experience which is relevant to the
style of mineralisation and type of deposit under consideration (including 21 years in ISR uranium mining
operations and technical work) and to the activity she is undertaking to qualify as a Competent Person as
defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves. Dr Marsland-Smith consents to the inclusion in this release of the matters based on her
information in the form and context in which it appears.
About Alligator Energy
Alligator Energy Ltd is an Australian, ASX-listed, exploration company focused on uranium and energy related
minerals, principally cobalt-nickel. Alligator’s Directors have significant experience in the exploration,
development and operations of both uranium and nickel projects (both laterites and sulphides).
Projects
7
APPENDIX 1
JORC Code, 2012 Edition – Table 1 (Sections 1 & 2)
Section 1 – Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
•
•
techniques
•
•
•
Drilling techniques
•
Nature and quality of sampling (e.g. cut channels, random chips, or
specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc). These
examples should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation that are Material to
the Public Report.
In cases where ‘industry standard’ work has been done this would
be relatively simple (e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was pulverised to produce a 30
g charge for fire assay’). In other cases more explanation may be
required, such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant disclosure of detailed
information.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary
air blast, auger, Bangka, sonic, etc) and details (e.g. core diameter,
triple or standard tube, depth of diamond tails, face-sampling bit or
other type, whether core is oriented and if so, by what method, etc).
•
•
•
•
•
Drill sample
•
recovery
•
•
Logging
•
•
•
Method of recording and assessing core and chip sample recoveries
and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
•
•
•
•
•
•
•
Results reported in this announcement relate to reverse circulation (RC) drilling during the 2023
exploration program at the Nabarlek North Project in the Alligator Rivers Uranium Province (“ARUP”),
Northern Territory. The program was a critical component of the integrated 2023 geophysical, geological
mapping and air-core/auger surveying, and continues from 2022 program.
Sampling of the RC drilling program involved the following components:
o
Drilling sample return is taken off the rig at 1 m intervals without any splitting. They are laid out in
numerically ordered labelled bags to avoid any confusion over intervals.
o
Following geological inspection, representative and non-composited 1-3 kg portions are taken from
the 1 m samples (above) where there is: a change in geological horizon, mineralisation, alteration
assemblages or any other zone of interest. Sampling is done on a maximum 10 m interval over the
entire drill hole as part of the geochemical program.
o
All samples are geologically logged, and natural gamma radioactivity level is measured with a RS230 BGO Handheld Gamma-Ray Spectrometer
Samples for assaying across the entire RC drilling program were shipped to the same laboratory under
one batch. Laboratory sample preparation is described in the ‘quality of assay data’ section.
Drilling was contracted to Topdrill P.L. of Western Australia. Using a Schramm T685 rig for reverse
circulation (RC), nine holes were completed, eight to 150m depth and one to 198m depth with a 5.5-inch
diameter bit.
Drill hole collar locations were positioned using a dual phase Garmin GPS with an approximate X-Y
tolerance of 3 to 5 m.
Holes were surveyed on completion of drilling with a Reflex SPRINT IQ gyroscopic compass. Survey
interval was typically 10 m and TD.
Sample recovery from the RC drilling is monitored during drilling with an assessment made on the
volume and weight of material recovered relative to the drill interval. If RC sample recovery is poor, it is
logged as such. This is systematically recorded in the logging database.
Cross-interval contamination is assessed regularly but it is not possible to eliminate from the RC drilling
process. No significant contamination issues have been encountered in this program.
For this program no apparent relationship was observed between sample recovery and grade. No
sample bias is expected.
Standard sample logging procedures are utilised, including logging codes for lithology, minerals, colour,
weathering etc.
A chip tray for selected sample intervals is completed covering interesting lithologies and mineralisation.
A sub-sample is sieved into chip trays to provide for further detailed logging once the assays have been
received.
All chip trays are photographed for digital archiving
Average natural gamma ray activity is measured for each sample. The instrument is routinely calibrated
Criteria
JORC Code explanation
Commentary
from counts to instrument-independent decay rate, taking into crystal volume, sensitivity, and dead-time.
Sub-sampling
•
techniques and
•
sample
preparation
•
•
•
•
Quality of assay
•
data and
laboratory tests
•
•
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature, quality, and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the
in-situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc, the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and precision have been
established.
•
•
•
•
•
•
•
•
•
Verification of
•
sampling and
•
•
assaying
•
Location of data
•
points
Data spacing and
distribution
•
•
•
•
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
•
•
Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the
•
•
•
•
•
The RC drilling process does not generate core but chips of samples as returns
The chips are recovered at one-meter intervals via the cyclone – wet or dry
As per sampling section, ~ 1-3 kg samples are extracted from the one-meter interval ‘bulk samples, for
routine laboratory submission. Samples for assaying are selected on the basis of a change in geological
horizon, mineralisation, alteration assemblages or any other zone of interest.
Samples are taken by spear of the bulk to provide an unbiased split for analysis.
To ensure laboratory reliability, a quality control (QC) sample was inserted in a maximum 1:40 ratio.
Blanks and Standards pertinent to the type of mineralisation and grades anticipated, were also submitted
with batches to verify laboratory sensitivity and thresholds
Sample analysis occurs at Bureau Veritas, SA
Samples were pulverized and then split to obtain separate aliquots:
o 0.2g aliquot dissolved in classic four acid mixture and assayed for minor elements (inc REEs) using
ICP-MS and ICP-OES. Resistate minerals may not be dissolved in this method and as such certain
elements can be considered minimum values (e.g., Zr, Ti).
o 1g aliquot that has been fused with lithium metaborate and dissolved in nitric acid and assayed for
major elements using ICP-OES. This is close to a full digestion of resistate minerals.
o 40g aliquot used for classic Firing technique (ICP-OES) to determine Au, Pt and Pd (PGEs).
o Aliquot for gravimetric analysis (Loss on Ignition)
o 0.2g aliquot dissolved in classic four acid mixture and assayed for lead and uranium isotopes using
ICP-MS. Resistate minerals may not be dissolved in this method (e.g., Zircon), which is intentional,
as the isotope values being sought are for remobilised materials that can provide evidence of
alteration or pathways for mineralising fluids.
Bureau Veritas employs standard NATA procedures for internal standards and duplicates.
Alligator’s project geologists are supervised by the Project Manager
All field data is entered into excel spreadsheets (supported by look-up tables) at site and subsequently
validated as it is imported into the centralized Access database.
Hard copies of logging and sampling data are stored in the local office and electronic data is stored on
the company server.
As an early exploration / part stratigraphic drilling program, twinning of results is not required. However,
all new data will be compared against legacy drill datasets, Alligator’s current aircore and auger
programs, geophysical coverage etc, to check for a consistent picture, possible discrepancies in new and
old data and anomalies – leading to an enhanced picture of local prospectivity.
All coordinate information was collected using hand held GPS utilizing GDA 94, Zone 53. While spatial
location is expected to be recovered within 3 – 5 m, it is possible that the elevation can be as much as 10
m out with respect to the currently established geoid.
All RC drillholes have been downhole surveyed at 5 m intervals, details provided earlier
The three RC drill lines (or fences) of three drillholes were strategically placed within the Narbalek North
project to:
o
Provide intercepts of a broad range of stratigraphy below cover
Criteria
JORC Code explanation
•
Commentary
o
o
o
Mineral Resource and Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been applied.
•
•
•
•
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known,
considering the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
Sample security
•
The measures taken to ensure sample security.
•
Audits or reviews
•
The results of any audits or reviews of sampling techniques and
• Audits or reviews of the sampling techniques were not undertaken.
data.
Section 2 Reporting of Exploration Results
Orientation of data
•
Provide partial tests of modelled low-dipping target stratigraphy and geophysical features
Test northerly extensions to the U40 mineralisation on the tenure’s southern boundary
Test a weak zone of hematitic alteration identified through AGE’s 2022 – 2023 aircore and auger
mapping programs
Within each fence, the three drill holes have been positioned and angled to:
o
Cover as much stratigraphy as possible without complicating drilling (hence steeply angled across
interpreted dip)
o
Provide as far as possible complete section coverage with overlapping (or near-overlapping) collar
to TD position from one hole to the next.
o
Account for the relatively narrow footprint of U mineralisation systems anticipated where,
mineralisation + alteration halo may be as narrow as sub 10 m. As such, fences of drillholes are
often required to be spaced at close intervals even at an early exploration stage.
Reported sample intervals have been composited based on a 200ppm U3O8 minimum cut off.
in relation to
geological
structure
•
Drill traverses were generally designed to be orthogonal to the predicted strike of geology and structure,
however, this is impractical in many cases owing to the access available and the uncertainty of the
geological geometry at this early stage of exploration.
The steepness of dip in the bedrock geology was not evident in outcrop in the locations covered with RC
fences. Consequently, it is possible that the angle of holes were not optimal to orthogonally cross-cut
stratigraphy or mineralisation encountered.
Company geologists supervise all sampling and subsequent storage in field and transport to point of
dispatch to the assay laboratory.
Section 2 – Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral tenement
•
•
and land tenure
status
•
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
•
•
•
•
•
Exploration done
•
Acknowledgment and appraisal of exploration by other parties.
•
by other parties
•
•
•
•
•
Exploration reported herein covers the southern part of the Nabarlek North Project area on ELs 29993
and 31480, as shown in the figures in the report.
More broadly, the Nabarlek North project comprises Exploration Licenses (ELs) 31480, 27252, 27253,
28389, 28390, 29991, 29992 & 29993. The Nabarlek North licences were granted to Northern
Prospector Pty Ltd, a wholly owned subsidiary of Alligator Energy Ltd on 20th April 2021.
The project lies within the Arnhem Land Aboriginal Reserve on Aboriginal Land Rights Act (ALRA) land,
about 250km east of Darwin, NT.
Alligator has obtained consent under the ALRA and an exploration agreement is in place, enabling work
programs to take place on the basis of annual approval by Traditional Owners and the Northern Land
Council.
Sacred sites in the areas take the form of registered sites, which the company has full understanding of
the location, and are excluded from exploration. Like any other jurisdiction, Alligator is required to protect
heritage and archaeological sites via work area clearances on an as-needs basis.
Alligator operates under an approved authorisation (Mining Management Plan; MMP) with the NT
Government.
Modern exploration for uranium commenced in the region following regional airborne radiometric surveys
over the Alligator Rivers Province by the BMR in 1969. The Nabarlek deposit, approximately 7km south
of EL31480, was subsequently discovered by Queensland Mines Ltd (QML) following a regional fixed
wing airborne radiometric survey. QML undertook follow up work consisting of radiometric surveys,
regional stream sediments surveys, ground follow up and geological mapping. As a result of this work
several prospects in proximity to the Nabarlek North packages were identified however modest Cenozoic
and Lateritic cover obscure basement and potential radiometric anomalies through the licences and
limited follow-up exploration has been conducted.
Exploration ceased in 1973 following the Federal Government decision to inhibit uranium mining in the
Alligator Rivers region. No work was undertaken in the area between 1973 and 1987 due to an embargo
on the grant of exploration licences in Arnhem Land.
Historically 9 licences have covered varying large and small parts of the Nabarlek North licences with
ELs 734 and 5890 operated by Cameco and PNC, AP2543 operated by Union Carbide, EL22707
operated by Rio Tinto and EL24868 operated by UXA resources being the primary historic licences of
note.
PNC/Cameco collected regional geophysical datasets and drilled sparse shallow RAB holes and
collected soil samples in the northern and western part of the current work area. No anomalous uranium
was encountered.
UXA collected AEM and Hyperspectral over a large part of the work area in 2011. This was followed by
soil sampling in a similar area to Alligator’s current work program area but was largely ineffectual due to
transported cover. Radon cup and ground scintillometer surveys were also of mixed success. In 20112012, UXA drilled 48 RC holes for 4056 m in areas of elevated radioactivity, most of which lie on the
southern boundary of the tenement package closer to the U40 Prospect (currently held by DevEx
Resources Ltd). Holes were gamma logged but no significant mineralisation was encountered. A small
ground gravity survey was undertaken, which has now provided Alligator with a comparative dataset for
the airborne gravity (Falcon).
DevEX Resources Ltd have continued to drill-test the U40 Prospect on the southern edge of AGE’s
Narbalek North. Details of results can be found in ASX announcements.
Criteria
JORC Code explanation
Commentary
Geology
•
•
Share your feedback
Discover